Overview
A powder filler for the repair of exterior masonry, concrete & brickwork. Formulated to set quickly and provide a strong and high-strength bond with excellent weather resistance. The cement and special resin ingredients produce a rock-hard and impact-resistant repair.
- Strong adhesion
- Accepts bolts, nails and screws
- Water resistant
- Hard weather resistant finish
| Area | Exterior |
| Recommended Use | Exterior general repairs of masonry, concrete & brickwork |
| Drying Time | 1 Hour |
| Re-Coat Time | 1 Hour |
| Recommended Coats | As required |
| Application Method | Filling knife |
| VOC Levels | Minimal |
| Clean Up | Remove excess from tools before cleaning in warm water |
Preparation
Always ensure the surface to be filled is free from dirt and any contaminates that may affect adhesion.
- Ensure the surface and cracks are free from any loose material.
- If the area to be filled is affected by mould, lichen, algae, or moss should be treated with .
Application
Always follow the manufacturer's instructions found on the packaging.
- Add 2.5 parts Polyfilla to 1 part water, always add the powder to the water.
- Mix thoroughly to form a smooth paste.
- For very porous surfaces use slightly more water and moisten the area before application.
- Paste remains workable for 30 minutes.
- Fill repair slightly proud with a filling knife.
- Before the filler is dry smooth off level to the surrounding area with a wet blade.
- If painting use an alkali-resistant primer prior to the finishing coat.
